DAH LIH

MCV-1020A/1020BA | MCV-1200 | MCV-1450 | MCV-1700 | MCV-2100/2600 | MCH-500/800 | DMX-320
DAH LIH
FEATURES
 

 

SPECIFICATIONS  UNITS
mm (inch)
DMX-320
TABLE
Table size   ø320 mm
T-Slots (Size x Number)   12H7 x 4
Max. workpiece weight   150kg
TRAVEL
X axis / Y axis / Z axis   600 mm / 550 mm / 500 mm
Table top surface to spindle nose   50~550mm
Slideway type (X, Y & Z axis)   Linear Guideway
FEED
Rapid traverse rate X / Y / Z axis   40 / 40 / 30 m/min
Cutting feed rate   18000 mm/min
Minimum Input Increment   0.001 mm
SPINDLE
Driving system   Direct Drive
Spindle motor (30 min. rating/continous rating)   *18.5kw (25HP)
Type of tool shank   N.T.40
Spindle Speed   *15000 rpm
Spindle bearing bore diameter   ø70 mm
Spindle max. torque   47N-m
Cooling / Lubrication   Oil / Grease
ATC
Tool magazine capacity   24T
Tool holder   BT40
Pull stud   45°
Max. Tool Weight   7kg
Max. Tool Length   265 mm
Max Tool Dia.   ø95 mm
Max Tool Dia. (adjacent pockets empty)   ø185 mm
Tool Selection   Random
MOTORS
X axis drive motors   4kW (5.3HP)
Y axis drive motors   4kW (5.3HP)
Z axis drive motors   4kW (5.3HP)
4th / 5th Axis
Max. work piece size   ø320 x 280 mm
Torque   250kg-m
Direction   Rotating Axis Tilting Axis
Brake type   Drym Type Double Drum Type
Angles   360° +30°~-120°
Max. speed   16 rpm 16 rpm
OTHER
Power   36KVA
Pneumatic pressure   6 kg/cm2
Collant pump   3/4 HP
Coolant tank capacity   280L
Net weight   7000 kgf

Design specifications are subject to change without notice.                                           022-D2-00-19

 

 

 

 DMX-320 Brochure

 

 

  Standard Accessories
  • Heat exchanger
  • Removable manual pulse generator
  • Enclosed splash guard
  • RS-232 interface
  • Embedded Ehternet
  • Automatic power off
  • Call light
  • Automatic power off
  • Automatic lubrication equipment
  • Work light
  • Tool kit
  • Spare fuses
  • Swing type operator panel
  • Spindle oil cooler
  • 24 tools cam type ATC
  • Rigid tapping
  • Chip augers on base
  • 5 axes control / 4 axes simultaneous function
  Optional Accessories
  • Screw type chip conveyor with chip bins
  • Flat type chip conveyor and chip bin
  • Coolant through spindle with filter
  • Bed coolant wash
  • Automatic tool length measuring device
  • Automatic workiece measuring device
  • Linear scale
  • 30, 32, 40 tools can type ATC
  • 12,000 rpm/15,000 rpm direct drive spindle with 15 HP
  • *15,000 rpm direct drive spindle with 25 HP
  • 15,000 rpm built-in spindle with 20 HP
  • Hallow ballscrew with cooling system
  • 5 axes simultaneous function
  • 24 tools cam type ATC