Home  - conventional machines  - mills  - knee type servo drive  -  LC-205VHD

FIRST - LC-205VHD

Features

CONTROL PANEL

• Digital read touch control panel.
• For safety, all control switches are wired low voltage.
• For operator's convenience control panel swivels on a swing arm.

SPINDLE UNIT

• Spindle is made from one piece of Ni-Cr alloy steel and supported by two precision angular contact and one ball bearing to ensure rigidity. The inner taper surface is induction hardened and precision ground to ensure durability. The spindle inner taper runout remains within 0.002mm.

HORIZONTAL SPINDLE

• All the gears that drive the horizontal spindle system are made of alloy steel, precision ground and hardened for heavy cutting and smooth quiet operation. The automatic lubrication system keeps the gears continuously lubricated. The 5HP drive motor with 6 speed changes offers high torque cutting in a wide range of speeds.

X, Y AXES TRANSMISSION SYSTEM

• Driven by a powerful AC Servo motor. A backlash-free timing belt provides a large feedrate range and smooth axes motion. Easy to use automatic machining cycles. Machine can run automatically.
• X & Y-Axis feed meter.
• X & Y-Axis ball screws.
• X & Y-Axis motor locks, eliminating the need to manually clamp table.

QUILL AND HOUSING

• The 110mm, 4.3" diameter large quill is chromed and mirror finished, then individually fitted to each quill housing. This close matching process offers extremely high spindle accuracy and machining stability.

Specifications: FIRST - LC-205VHD

Related Products: LC-20VSG LC-20VHS LC-205VSD MetricImperial

TRAVELS	METRIC	IMPERIAL
X-Axis	835 mm	32.8"
Y-Axis	420 mm	16.54"
Z-Axis	435 mm	17.12"
Guideway type X / Y / Z	dovetail / box / box	dovetail / box / box
Bedway type X / Y / Z	hardened & ground Turcite-B	hardened & ground Turcite-B
TABLE
Work surface	1300 x 300 mm	51 x 11.81"
T-slot number (width x pitch)	3 (15.87 x 63.5 mm)	3 (0.62 x 2.5")
Max table load	550 kg	1213 lb
VERTICAL SPINDLE
Taper	ISA40	ISA40
Spindle drive motor	5hp	5hp
Spindle speed (variable)	25 - 3600 rpm	25 - 3600 rpm
Quill travel	135 mm	5.31"
Quill diameter	110 mm	4.33"
Quill feeds	0.035, 0.07, 0.14 mm/rev	0.0014, 0.0028, 0.0055"/rev
Head swivel R & L	90°	90°
Head swivel F & B	-	-
Overarm travel	470 mm	18.50"
Overarm swivel	360°	360°
Spindle nose to table	75 - 510 mm	2.9 - 20"
Spindle nose to column surface	355 - 825 mm	14 - 32.5"
HORIZONTAL SPINDLE
Taper	ISA40	ISA40
Horizontal spindle drive motor	5hp	5hp
Spindle speed (6-step)	55 - 1180 rpm	55 - 1180 rpm
Spindle center to table surface	-25 - 410 mm	-1 - 16.1"
Spindle center to overarm surface	146 mm	5.7"
FEED SYSTEM
Longitudinal feed (variable)	22 - 2100 mm/min	0.8 - 82.7"/min
Longitudinal rapid feed	2100 mm/min	82.7"/min
Vertical rapid feed	800 mm/min	31.5"/min
Longitudinal feed motor	AC Servo / 4.77Nm	AC Servo / 4.77Nm
Cross feed motor	AC Servo / 4.77Nm	AC Servo / 4.77Nm
Vertical feed motor	1.5hp 6P	1.5hp 6P
GENERAL
Electrical rating	230V 30Amp 3Ph 60Hz	230V 30Amp 3Ph 60Hz
Electrical approval	CSA SPE-1000	CSA SPE-1000
PHSR exemption letter	valid in Ontario	valid in Ontario
Weight	2010 kg	4430 lb
The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice.

Standard Accessories

• X & Y-Axis ball screws
• Rubber chip covers F & R
• Automatic lubrication system
• Horizontal milling arbor & support (205VHD)
• Coolant system, splash tray & guard
• Levelling bolts, nuts and pads

Included Accessories

• -X, Y & Z-Axis digital read control touch panel
• -Align air power drawbar
• -LED Machine lamp
• 14KVA Transformer 600V-220V