905-564-9479
Home  - conventional machines  - mills  - knee type servo drive  -  LC-205VSD

FIRST - LC-205VSD

AC Servo Vertical Variable Speed Milling Machine

Features

CONTROL PANEL

  • Digital read touch control panel.
  • For safety, all control switches are wired low voltage.
  • For operator's convenience control panel swivels on a swing arm.

SPINDLE UNIT

  • Spindle is made from one piece of Ni-Cr alloy steel and supported by two precision angular contact and one ball bearing to ensure rigidity. The inner taper surface is induction hardened and precision ground to ensure durability. The spindle inner taper runout remains within 0.002mm.

X, Y AXES TRANSMISSION SYSTEM

  • Driven by a powerful AC Servo motor. A backlash-free timing belt provides a large feedrate range and smooth axes motion. Easy to use automatic machining cycles. Machine can run automatically.
  • X & Y-Axis feed meter.
  • X & Y-Axis ball screws.
  • X & Y-Axis motor locks, eliminating the need to manually clamp table.

QUILL AND HOUSING

  • The 110mm, 4.3" diameter large quill is chromed and mirror finished, then individually fitted to each quill housing. This close matching process offers extremely high spindle accuracy and machining stability.

Specifications: FIRST - LC-205VSD

Related Products:

TRAVELS METRIC IMPERIAL
X-Axis 835 mm 32.8"
Y-Axis 420 mm 16.54"
Z-Axis 460 mm 18.11"
Guideway type X / Y / Z dovetail / box / box dovetail / box / box
Bedway type X / Y / Z hardened & ground Turcite-B hardened & ground Turcite-B
TABLE
Work surface 1300 x 300 mm 51 x 11.8"
T-slot number (width x pitch) 3 (15.87 x 63.5 mm) 3 (0.62 x 2.5")
Max table load 550 kg 1213 lb
VERTICAL SPINDLE
Taper ISA40 ISA40
Spindle drive motor 5hp 5hp
Spindle speed (variable) 25 - 3600 rpm 25 - 3600 rpm
Quill travel 135 mm 5.3"
Quill diameter 110 mm 4.33"
Quill feeds 0.035, 0.07, 0.14 mm/rev 0.0014, 0.0028, 0.0055"/rev
Head swivel R & L 90° 90°
Head swivel F & B - -
Overarm travel 470 mm 18.5"
Overarm swivel 360° 360°
Spindle nose to table 40 - 500 mm 1.5 - 19.6"
Spindle nose to column surface 355 - 825 mm 14 - 32.5"
HORIZONTAL SPINDLE
Taper - -
Horizontal spindle drive motor - -
Spindle speed (6-step) - -
Spindle center to table surface - -
Spindle center to overarm surface - -
FEED SYSTEM
Longitudinal feed (variable) 22 - 2100 mm/min 0.8 - 82.7"/min
Longitudinal rapid feed 2100 mm/min 82.7"/min
Vertical rapid feed 800 mm/min 31.5"/min
Longitudinal feed motor AC Servo / 4.77Nm AC Servo / 4.77Nm
Cross feed motor AC Servo / 4.77Nm AC Servo / 4.77Nm
Vertical feed motor 1.5hp 6P 1.5hp 6P
GENERAL
Electrical rating 230V 30Amp 3Ph 60Hz 230V 30Amp 3Ph 60Hz
Electrical approval CSA SPE-1000 CSA SPE-1000
PHSR exemption letter valid in Ontario valid in Ontario
Weight 1800 kg 3970 lb
The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice.

Standard Accessories

  • X & Y-Axis ball screws
  • Rubber chip covers F & R
  • Automatic lubrication system
  • Coolant system, splash tray & guard
  • Levelling bolts, nuts and pads

Included Accessories

  • -X, Y & Z-Axis digital read control touch panel
  • -Align air power drawbar
  • -LED Machine lamp
  • 15KVA Transformer 600V-220V