905-564-9479
Home  - conventional machines  - lathes  - standard  -  TY-1640S

MICROWEILY - TY-1640S

High Speed Precision Lathe

Features

  • One piece Meehanite cast base.
  • Hardened and precision ground gears and bed ways.
  • The cross slide is induction hardened to HRC 52° and precision ground.
  • The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.

Specifications: MICROWEILY - TY-1640S

Related Products:

CAPACITY METRIC IMPERIAL
Distance between centres 1016 mm 40"
Swing over bed 410 mm 16.14"
Swing over cross slide 240 mm 9.44"
Swing in gap 595 mm 23.42"
Length of gap in front of face plate 155 mm 6.10"
Centre height 205 mm 8.07"
Bed width 300 mm 11.81"
HEADSTOCK
Spindle bore 52 mm 2.04"
Spindle nose D1-6 D1-6
Spindle taper in nose MT6 MT6
Spindle taper in sleeve MT4 MT4
Speed range (12-step) 30 - 2000 rpm 30 - 2000 rpm
CARRIAGE & COMPOUND
Cross slide travel 240 mm 9.44"
Compound rest travel 120 mm 4.72"
Leadscrew diameter, thread ø1 1/4", 4 TPI ø1 1/4", 4 TPI
THREADS & FEEDS
Imperial pitches 40 Pos 2-56 TPI 2-56 TPI
Metric pitches 52 Pos 0.4-14 mm Pitch 0.4-14 mm Pitch
Diametral pitches 32 Pos 4-56 DP 4-56 DP
Module pitches 44 Pos 0.4-7 MP 0.4-7 MP
Cross feeds 40 Pos 0.016-0.449 mm/rev 0.0006-0.0126"/rev
Longitudinal feeds 40 Pos 0.032-0.898 mm/rev 0.0012-0.0252"/rev
TAILSTOCK
Quill diameter ø54 mm ø2.12"
Quill travel 130 mm 5.11"
Quill taper MT4 MT4
MOTORS
Spindle motor 5hp 5hp
Coolant pump 1/8hp 1/8hp
GENERAL
Electrical rating 600V 7.5Amp 3Ph 60Hz 600V 7.5Amp 3Ph 60Hz
Electrical approval CSA SPE-1000 CSA SPE-1000
PHSR exemption letter valid in Ontario valid in Ontario
Weight 1750 kg 3858 lb
The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice.

Standard Accessories

  • Headstock chuck guard
  • Coolant system
  • Rear splash guard
  • Micro stop
  • Steady rest with roller bearings 1-6"
  • Levelling bolts, nuts & pads

Included Accessories

  • 8" 3-Jaw D1-6 self centering precision steel chuck, direct mount
  • GS2-B Klopfer quick change precision tool post
  • BD-25140 Tool holder for tool post (2pcs)
  • BH-30130 Bar holder for tool post
  • 2-Axis digital readout installed

Optional Accessories

  • 10" 4-Jaw D1-6 independent chuck, direct mount
  • 12" 4-Jaw D1-6 independent chuck, direct mount
  • Follow rest
  • Taper attachment
  • LED Machine lamp