905-564-9479
Home  - conventional machines  - lathes  - variable speed  -  TY-2000

MICROWEILY - TY-2000

Heavy Duty Variable Speed Centre Lathe

Features

  • Hardened and precision ground gears and bed ways.
  • The cross slide is induction hardened to HRC 52° and precision ground.
  • The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.
  • Two speed tailstock is standard.

Specifications: MICROWEILY - TY-2000

Related Products:

CAPACITY METRIC IMPERIAL
Distance between centres 1600 mm 62.99"
Swing over bed 460 mm 18.11"
Swing over cross slide 288 mm 11.33"
Swing in gap 640 mm 25.19"
Length of gap in front of face plate 180 mm 7.08"
Centre height 230 mm 9.05"
Bed width 300 mm 11.81"
HEADSTOCK
Spindle bore 60 mm 2.36"
Spindle nose D1-6 D1-6
Spindle taper in nose MT6 MT6
Spindle taper in sleeve MT4 MT4
Speed range H 100 - 2000 rpm 100 - 2000 rpm
Speed range M 35 - 680 rpm 35 - 680 rpm
Speed range L 15 - 220 rpm 15 - 220 rpm
CARRIAGE & COMPOUND
Cross slide travel 265 mm 10.43"
Compound rest travel 135 mm 5.31"
Leadscrew diameter, thread ø1 3/8", 4 TPI ø1 3/8", 4 TPI
THREADS & FEEDS
Imperial pitches 60 Pos 2-112 TPI 2-112 TPI
Metric pitches 60 Pos 0.2-14mm Pitch 0.2-14mm Pitch
Diametral pitches 50 Pos 4-112 DP 4-112 DP
Module pitches 50 Pos 0.2-7 MP 0.2-7 MP
Cross feeds 50 Pos 0.0185-0.52mm/rev 0.0007-0.01935"/rev
Longitudinal feeds 50 Pos 0.037-1.04mm/rev 0.0014-0.0387"/rev
TAILSTOCK
Quill diameter ø60 mm ø2.36"
Quill travel 150 mm 5.90"
Quill taper MT4 MT4
MOTORS
Spindle motor 10hp 10hp
Coolant pump 1/8hp 1/8hp
GENERAL
Electrical rating 220V 30Amp 3Ph 60Hz 220V 30Amp 3Ph 60Hz
Electrical approval CSA SPE-1000 CSA SPE-1000
PHSR exemption letter valid in Ontario valid in Ontario
Weight 2000 kg 4409 lb
The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice.

Standard Accessories

  • Headstock chuck guard
  • Coolant system
  • Rear splash guard
  • Micro stop
  • Steady rest with roller bearings 1-6"
  • 2 Speed tailstock
  • Levelling bolts, nuts & pads

Included Accessories

  • 10" 3-Jaw D1-6 self centering precision steel chuck, direct mount
  • GS2-B Klopfer quick change precision tool post
  • BH-30130 Bar holder for tool post
  • BD-25140 Tool holder for tool post (2pcs)
  • 2-Axis digital readout installed
  • 14KVA Transformer for 600V Sec 220V

Optional Accessories

  • 12" 4-Jaw D1-6 independent chuck, direct mount
  • Follow rest
  • Taper Attachment
  • LED Machine lamp