CNC lathes are inspected by using advanced laser equipment ensuring machining accuracy and repeatability. Linear accuracy of the machine is maintained using CNC's leadscrew compensation function.
CAPACITY | METRIC | IMPERIAL | |
Distance between centres | 4000 | 157.48" | |
Swing over bed | 560 mm | 22.04" | |
Swing over cross slide | 280 mm | 11.02" | |
Width of bed | 460 mm | 18.11" | |
HEADSTOCK | |||
Spindle nose | D1-8 (*D1-11) | D1-8 (*D1-11) | |
Spindle bore | 86 mm (*105 mm) | 3.38" (*4.13") | |
Speed range | D1-8, 15-1500 rpm | D1-8, 15-1500 rpm | |
Spindle bearing type | taper roller bearing | taper roller bearing | |
Spindle taper in nose | MT8 | MT8 | |
Spindle taper in sleeve | MT5 | MT5 | |
TRAVELS | |||
Longitudinal travel Z-Axis | 4000 mm | 157.48" | |
Cross slide travel X-Axis | 500 mm | 19.68" | |
Cross slide dimension | 1000 x 258 mm | 39.37 x 10.15" | |
Ballscrew diameter Z-Axis | 50 mm | 1.96" | |
Ballscrew diameter X-Axis | 32 mm | 1.25" | |
FEEDRATE | |||
Rapid traverse X,Z-Axis | 10 M/min | 393.70"/min | |
TAILSTOCK | |||
Quill diameter | 90 mm | 3.54" | |
Quill travel | 200 mm | 7.87" | |
Quill taper | MT5 | MT5 | |
MOTOR | |||
Spindle motor | Fagor 18.64kW / Fanuc 14.91kW | Fagor 25hp / Fanuc 20hp | |
Z-Axis Servo | AC 2.0kW | 2.6hp | |
X-Axis Servo | AC 1.5kW | 2hp | |
Coolant pump | upgrade 0.55kW | upgrade 3/4hp | |
GENERAL | |||
Electrical approval | CSA SPE-1000 | CSA SPE-1000 | |
Power required | 25kVA | 25kVA | |
Voltage required FAGOR / FANUC | 600V or 400V / 220V | 600V or 400V / 220V | |
Air pressure required | 7 bar | 100psi | |
Coolant tank capacity | 200 L | 52.8 US gal | |
CONTROLLER | |||
CNC Control | FAGOR / FANUC | FAGOR / FANUC | |
*Option | |||
The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice. |